Feet and Inches to CM: Height Conversion Chart (5’0″ to 6’3″)

If you have ever stared at a form asking for your height in centimeters while you only know it in feet and inches, you are not alone. To convert feet and inches to cm, turn the whole height into inches first, then multiply by 2.54 — so 5’6″ is 66 inches × 2.54 = 167.6 cm. That one multiplication is the entire method, and it never changes.

You will meet this feet and inches to cm conversion on medical intake forms, visa and passport applications, online clothing size charts, and sports registration pages. The height conversion chart below covers every height from 5’0″ to 6’3″ in one-inch steps, so you can look up your number in seconds. After the chart, you will find the three-step method to convert any height yourself, plus the common heights people search for most, like 5’9″ and 6’0″. No calculator tricks, no guesswork — just the exact numbers.

Feet and Inches to CM Conversion Chart (5’0″ to 6’3″)

This chart converts every height from 5 feet 0 inches to 6 feet 3 inches into centimeters, rounded to one decimal place. Find your height in the left column and read across for the centimeter value.

Height	Centimeters
5’0″	152.4 cm
5’1″	154.9 cm
5’2″	157.5 cm
5’3″	160.0 cm
5’4″	162.6 cm
5’5″	165.1 cm
5’6″	167.6 cm
5’7″	170.2 cm
5’8″	172.7 cm
5’9″	175.3 cm
5’10”	177.8 cm
5’11”	180.3 cm
6’0″	182.9 cm
6’1″	185.4 cm
6’2″	187.9 cm
6’3″	190.5 cm

Every value comes from the same exact definition: one inch equals 2.54 centimeters, so each row is simply the total inches multiplied by 2.54. If your height falls outside this range, the three-step method in the next section handles any value, taller or shorter.

How to Convert Any Height Yourself

The chart is fast, but knowing the method means you never depend on one. Converting feet and inches to cm takes three short steps, and each step is simple arithmetic you can do on paper or in your head.

Step 1: Turn the feet into inches. Multiply the feet by 12, because every foot holds 12 inches. For 5’7″, that is 5 × 12 = 60 inches.

Step 2: Add the leftover inches. Add the inches part of the height to the number from Step 1. For 5’7″, that is 60 + 7 = 67 total inches. This is the step people skip most often, and skipping it is the main reason conversions go wrong.

Step 3: Multiply the total inches by 2.54. This is the exact, internationally agreed definition of the inch. For 5’7″, that is 67 × 2.54 = 170.18 cm, which rounds to 170.2 cm — matching the chart above.

Here is a second worked example with a taller height. Take 6’1″. Step 1: 6 × 12 = 72 inches. Step 2: 72 + 1 = 73 total inches. Step 3: 73 × 2.54 = 185.42 cm, which rounds to 185.4 cm. Again, that matches the chart row for 6’1″ exactly.

Going the other direction — centimeters back to feet and inches — just reverses the process. Divide the centimeters by 2.54 to get total inches, then divide by 12: the whole number is the feet, and the remainder is the inches. For example, 175 cm ÷ 2.54 = 68.9 inches. Then 68.9 ÷ 12 = 5 feet with 8.9 inches left over, so 175 cm is about 5’9″. Round the inches to the nearest whole number and you are done.

If you need a rough answer with no calculator, here is a mental shortcut. Multiply the total inches by 2.5 instead of 2.54, then nudge the answer up slightly. For 5’9″ (69 inches): 69 × 2.5 = 172.5, and the true value is 175.3 cm. The shortcut lands within a few centimeters, close enough for a quick estimate, while the three-step method gives you the exact figure whenever it matters.

One more detail worth knowing: the single quote mark (‘) stands for feet and the double quote mark (“) stands for inches, so 5’6” reads as “5 feet 6 inches.” If that notation ever looks like code, our guide to how to read feet-and-inches measurements decodes it fully.

Common Heights You Will Look Up

Most people do not convert random heights — they convert their own, a family member’s, or a famous benchmark. Here are the heights that come up again and again, with the centimeter values and a little context for each.

5’0″ — 152.4 cm

Five feet even is a common height for petite adults and older children, and it sits right at the threshold where many amusement park ride minimums are set. In centimeters it is 152.4 cm, a number that shows up constantly on international forms. If you are filling out paperwork and see 152 cm requested, this is almost certainly the height being described, with the decimal simply dropped.

5’3″ — 160.0 cm

At 160.0 cm, 5’3″ is one of the most frequently listed heights on driver’s licenses and ID cards around the world. The conversion lands on a beautifully round number — exactly 160 cm — which makes it easy to remember. Anyone near this height can simply write 160 cm on metric forms without worrying about the decimal at all.

5’4″ — 162.6 cm

Five feet four inches converts to 162.6 cm, and it is roughly the average height of an adult woman in the United States. Averages shift a little between surveys and countries, so treat that as a ballpark rather than a precise claim. On a form, 163 cm rounded is perfectly acceptable, and nobody measuring for clothing or medical purposes will quibble over half a centimeter.

5’6″ — 167.6 cm

This is the worked example from the introduction: 66 total inches × 2.54 = 167.64 cm, which rounds to 167.6 cm. It is an extremely common listed height, the kind you see on dating profiles, sports rosters, and casting calls. If a chart asks for a whole number, 168 cm is the honest rounding — the FAQ below explains why you sometimes see both.

5’7″ — 170.2 cm

Five seven converts to 170.2 cm, crossing the psychologically satisfying 170 cm line. That round metric milestone is why this height gets looked up so often: people want to know whether they clear 170. At 170.2 cm, the answer is yes, with two millimeters to spare. It is also a frequent cutoff in modeling and uniform sizing discussions.

5’9″ — 175.3 cm

At 175.3 cm, 5’9″ is roughly the average height of an adult man in the United States — again, a ballpark figure that varies by survey. It is probably the single most searched height conversion on the internet, which makes sense given how many men cluster near it. Memorize 175 cm as the rounded version and you will rarely need the chart for this one.

6’0″ — 182.9 cm

Six feet even is the great milestone height, and it converts to 182.9 cm — just shy of 183. People rounding up will write 183 cm, and nobody will object. The cultural weight of “six feet tall” makes this one of the most looked-up conversions there is, and the .9 at the end surprises people who expect a rounder number.

6’1″ — 185.4 cm

One inch past the milestone, 6’1″ is 185.4 cm. This is the second worked example from the method section above: 73 total inches × 2.54 = 185.42, rounded to 185.4. It appears often in athlete listings, where an inch either way gets noticed, so the one-decimal precision here actually matters to the people searching for it.

6’2″ — 187.9 cm

At 187.9 cm, 6’2″ sits firmly in tall territory and shows up constantly in basketball guard listings and tall-size clothing charts. The conversion is 74 × 2.54 = 187.96, rounded to 187.9 cm. If you are buying clothes in metric-sized markets, 188 cm is the practical number to carry in your head.

6’8″ — 203.2 cm (just above the chart)

This one sits just above the chart’s range, but it earns its place: 6’8″ is the height of a standard American interior doorway, and it converts to exactly 203.2 cm. It is the number behind every “will it fit through the door” question. For the full picture of this height, see our guide to how tall 80 inches is — because 80 inches and 6’8″ are the same measurement.

Frequently Asked Questions

Is 5’6″ 167 cm or 168 cm?

The exact conversion is 167.64 cm, which rounds to 167.6 cm at one decimal place. Rounded to the nearest whole centimeter, it becomes 168 cm. Both are correct — they just use different rounding. Use 167.6 cm when precision matters and 168 cm for everyday purposes.

How do I convert cm back to feet and inches?

Divide the centimeters by 2.54 to get total inches, then divide that by 12. The whole number is your feet and the remainder is your inches. For example, 180 cm ÷ 2.54 = 70.9 inches, and 70.9 ÷ 12 = 5 feet with 10.9 inches left over — about 5’11”.

Why does another chart show a slightly different number than yours?

Almost always, it is rounding. One chart may round to whole centimeters while another keeps one decimal, so 5’9″ appears as 175 cm in one place and 175.3 cm in another. The underlying math — total inches × 2.54 — is identical everywhere because the inch is defined as exactly 2.54 cm.

What is 5’10” in cm?

5’10” is 177.8 cm. That is 70 total inches × 2.54 = 177.8 exactly, no rounding needed. It is a handy anchor height: just under 178 cm, just over 5’9″, and one of the most commonly converted heights in the chart.

Final Thoughts

Converting feet and inches to cm comes down to one formula: total inches × 2.54. The chart above handles every height from 5’0″ to 6’3″ at a glance, and the three-step method covers anything outside that range — including the trip back from centimeters to feet and inches. Once you have done it twice, the process becomes automatic.

The real value is never needing to guess on a form again. Whether you are entering 175.3 cm for 5’9″ on a medical intake, writing 162.6 cm for 5’4″ on a visa application, or checking whether 6’8″ clears a doorway at 203.2 cm, you now have the exact numbers and the method behind them. Pick the two or three heights you use most, memorize their centimeter values, and this conversion will never slow you down again.